Vikram & Co. - Manufacturers ; Distributors of couplings hoses

Composite Hose

	Composite Hose
	LD 10 Chemical For transfer of all Hydrocarocarbons & Chemicals
	Chem Marine 707
	Oil Marine 808
	Chmechlor 900
	PTFE Marine 330
	Cryotec 660
	Standard end Fittings
	Handling & Maintenance
	Chemical Resistance Chart

CHEM MARIN 707

Color	: Green
Wires	* Polypropylene coated mild steel internal wire * Galvanized steel external wire * Also available with Aisi 316 L Stainless Steel internal or external wires

Construction

COMPOTEC® CHEM MARINE 707, is designed with extra Polypropylene films and fabrics, plus a bigger and higher density wire, with a weather-proof and abrasion resistant outer cover. COMPOTEC® CHEM MARINE 707 includes in the construction an extruded HD PLT tubular and Mylar® polyester films. All the different layers are wrapped together and tensioned between internal

and external wire spirals. Because of our modern equipment, internal and external wires are assembled with maximum precision and optimal tension. This enables our product to maintain extreme flexibility with tremendous strength and durability.

Characteristics

*Specifically designed for heavy duty transfer of a wide variety of chemicals under suction or pressure. CHEM MARINE 707 hoses are used for ship to shore and ship to ship, dockside, and general shipboard use. All hoses are 100% aromatic resistant, anti static and can be used for suction and discharge.

*COMPOTEC® hoses are fitted with an extensive range of couplings readily available, externally swaged with Stainless Steel ferrules.

Safety

*All hoses are tested at 11/2 times rated working pressure for safety and reliability, in accordance with BS 5842;1980 clause 6.4.Full test certification can be supplied on request, issued in our laboratories, or witnessed from independent third part Institutes.

*Hoses are designed, for type approval, to a burst pressure 5 time the W.P.
Burst pressure indicated, is at ambient temperature when tested in accordance with BS 5173 section 102.10.1990.

*Electrical continuity is achieved by the two wires bonded to the end fittings, this helps dissipate accumulated charge and to avoid static flash. The electric resistance of hose assemblies is less than 10 ohms, as required by BS 5842:1980 clause 6.2. Hose assemblies can also be provided, on request, electrically discontinuous.

*It is possible, on request, to offer a range of hoses with fire and flame resistance CL 1, please contact COMPOTEC® Technical Department for further information.

Temperature range

-40ºC +100ºC

Size		Maximum W.P		Burst		Bend Radius		Weight		Maximum length
mm	Inch	Bar	psi	mm	psi	mm	Inch	kg/mt.	Lb/Ft	Mt	Feet
100	4	15	200	75	1000	400	16	6,5	4.3	25	82
150	6	15	200	75	1000	550	21	11	7.4	25	82
200	8	15	200	75	1000	675	26	15	10	25	82

Note :
All hoses are available in an assortment of colors and, it is possible, on request, to add a "customer labeling" or "product labeling " to the outside wall. Burst pressure indicated is at ambient temperature. Maximum temperature rating can only be maintained when working within limits of working pressure.

Vikram & Co. specialized in all types of hoses such as polypropylene, hydraulic, rubber hose, stainless steel hose, couplings, bellows, expansion joint, and pipe fittings in Mumbai India.

Profile | Products | Enquiry | Contact Us | Site Map