 |
Composite Hose |
| |
|
| |
|
|
| |
|
|
| |
|
|
|
|
LD
10 FOR CHEMICAL APPLICATION & FOR ALL HYDROCARBONS TRANSFER
|
| Color |
*
LD 10 CHEM Green -for Chemical applications
in general
* LD 10 OIL Blue -for all Hydrocarbons
transfer
* LD 10 VAP Yellow -for Vapour recovery |
|
|
Wires |
*
P = Polypropylene coated mild steel wire
* Z = Galvanized wire
* A = Aluminum wire |
|
| |
| |
Construction |
COMPOTEC®
LD 10 hoses
are manufactured from
Polypropylene and Polyethylene films
and fabrics with a weather-proof
and abrasion resistant
outer cover. All the
different layers are wrapped
together and tensioned between
internal and external
wire spirals. This
construction gives and exceptionally
tough hose with maximum flexibility,
Where exceptionally low weight is
requested, hoses with internal or both,
internal and external wires in aluminum are available.
|
Characteristics:
|
*COMPOTEC®
LD
10 hoses, are designed as
general purpose hoses for the transfer
of a wide
variety of conveyants
under suction or pressure. COMPOTEC®
LD 10 hoses, are used in such
applications as low pressure.
transfer for road and
rail tanker loading and discharging,
storage tank and in-plant use.
High chemical resistance, durability and
strong construction for a long
life, but at the same time light
and flexible for ease of handling.
All hoses are 100% aromatic
resistant, anti static and can be used
for suction and discharge.
*COMPOTEC® hoses are fitted
with an extensive range
of couplings readily available externally
swaged with Stainless Steel ferrules.
|
Safety
|
|
*All
hoses are tested at
11/2 times rated working pressure for
safety and reliability, in accordance
with BS 5842;1980 clause 6.4.Full test certification
can be supplied on request.
*Reduce the environmental risk of pollution
and cost of spillage thanks to the unique features
of COMPOTEC®
LD
10 hoses.
*Burst pressure indicated,
is at ambient
temperature when tested in
accordance with BS 5173 section 102.10.1990.
*Electrical continuity is
achieved by the two
wires bonded to the end fittings,
this helps dissipate accumulated
charge and to avoid static flash. The
electric resistance of hose assemblies
is less than 10 ohms, as required by BS 5842:1980
clause 6.2.
*It is possible, on request,
to offer a range of hoses
with fire and flame resistance CL
1, please contact
COMPOTEC® Technical Department for
further information.
|
| Temperature
range |
-200ºC
+ 80ºC |
|
SizeMaximum
W.P Burst |
Bend
Radius |
Weight
|
Maximum
length |
| mmInchBar
psi
mmpsimm |
Inch
ZZAZAA |
Mt |
| 4011/2101505075085 |
31/21,310.6 |
25 |
| 5021015050750125 |
52,91,51 |
25 |
| 6321/21015050750150 |
62,621,3 |
25 |
| 7631015050750185 |
73,42,61,6 |
25 |
| 8031015050750185 |
73,52,71,7 |
25 |
| 10041015050750275 |
104,63,52,3 |
25 |
|
|
|
Note
:
|
|
*COMPOTEC®
hoses
type LD 10 OIL AZ, fully complies B.S. 3492:1987,
for carrying gasoline, Kerosene, fuel and lubrication
oils, including aviation fuels with high aromatic
content at a temperature up to 80ºC.
All types are suitable for use with a vacuum
not exceeding 0.5 Bar. COMPOTEC® LD 10 OIL
AZ hose, is defined, according to the Standard
descriptions, under type "BX" for
all products included in " CLASS 1".
|
|
|
|
| |
| Vikram & Co. specialized
in all types of hoses such
as polypropylene, hydraulic, rubber hose, stainless
steel hose, couplings, bellows, expansion joint,
and pipe fittings in Mumbai India. |
|
|
