Vikram & Co. - Manufacturers & Distributors of couplings hoses

Composite Hose

	Composite Hose
	LD 10 Chemical For transfer of all Hydrocarocarbons & Chemicals
	Chem Marine 707
	Oil Marine 808
	Chmechlor 900
	PTFE Marine 330
	Cryotec 660
	Standard end Fittings
	Handling & Maintenance
	Chemical Resistance Chart

OIL MARINE 808

Color	* Dark Blue
Wires	Galvanized mild steel internal and external Also available with Stainless Steel Aisi 316 L wires

Construction

COMPOTEC® OIL MARINE 808, is designed with extra Polypropylene films and fabrics, plus a bigger and higher density wire, with a weather-proof and abrasion resistant outer cover. COMPOTEC® OIL MARINE 808, includes in the construction an extruded HD PLT tubular and Mylar® polyester films. All the different layers are wrapped together and tensioned between internal and external wire spirals. Because of our modern equipment, internal and external

wires are assembled with maximum precision and optimal tension. This enables our product to maintain extreme flexibility with tremendous strength and durability.

Characteristics:

*Specifically designed for the transfer of a wide variety of hydrocarbon conveyants under suction or pressure, OIL MARINE 808 hoses are used for ship to shore and ship to ship applications. All hoses are 100% aromatic resistant, anti static and can be used for suction and discharge.

*COMPOTEC® hoses are fitted with an extensive range of couplings readily available externally swaged with Stainless Steel ferrules.

*All the "COMPOTEC® MARINE" hoses complies with B.S. 5842:1980.

Safety

*All hoses are tested at 11/2 times rated working pressure for safety and reliability, in accordance with BS 5842;1980 clause 6.4.Full test certification can be supplied on request, issued in our laboratories, or witnessed form independent third part Institutes.

*Hoses are designed, for type approval, to a burst pressure 5 time the W.P.
Burst pressure indicated, is at ambient temperature when tested in accordance with BS 5173 section 102.10.1990.

*Electrical continuity is achieved by the two wires bonded to the end fittings, this helps dissipate accumulated charge and to avoid static flash. The electric resistance of hose assemblies is less than 10 ohms, as required by BS 5842:1980 clause 6.2.

*It is possible, on request, to offer a range of hoses with fire and flame resistance CL 1, please contact COMPOTEC® Technical Department for further information.

Temperature range

-40ºC + 100ºC

SizeMaximum W.P BurstBend Radius		Weight		Maximum length
mm	Inch	Bar psi	mm	psi	mmInch	kg/mt.	Lb/Ft	Mt	Feet
100	4	15200	75	1000	40016	6,5	4.3	25	82
150	6	15200	75	1000	55021	11	7.4	25	82
200	8	15200	75	1000	67526	15	10	25	82

Note :
* All hoses are available in an assortment of colors and, it is possible, on request, to add a "customer labeling" or "product labeling " to the outside wall. *Burst pressure indicated is at ambient temperature. Maximum temperature rating can only be maintained when working within limits of working pressure.

Vikram & Co. specialized in all types of hoses such as polypropylene, hydraulic, rubber hose, stainless steel hose, couplings, bellows, expansion joint, and pipe fittings in Mumbai India.

Profile | Products | Enquiry | Contact Us | Site Map