Vikram & Co. - Manufacturers & Distributors of couplings hoses

Composite Hose

	Composite Hose
	LD 10 Chemical For transfer of all Hydrocarocarbons & Chemicals
	Chem Marine 707
	Oil Marine 808
	Chmechlor 900
	PTFE Marine 330
	Cryotec 660
	Standard end Fittings
	Handling & Maintenance
	Chemical Resistance Chart

PTFE MARINE 330

Color	* Green or Black
Wires	* Aisi 316 L Stainless Steel external and internal wires.

Construction

COMPOTEC® PTFE MARINE 330, is designed around several PTFE films, with extra Polypropylene films and fabrics, plus a bigger and higher density wire, with a weather-proof and abrasion resistant Hypalon outer cover. COMPOTEC® PTFE MARINE 330, includes in the construction an extruded FEP tubular and Mylar® polyester films. All the different layers are wrapped together and tensioned between internal and external wires are assembled with

maximum precision and optimal tension. This enables our product to maintain extreme flexibility with tremendous strength and durability.

Characteristics:

*Specifically designed for the transfer of a wide variety of hydrocarbon conveyants under suction or pressure, PTFE MARINE 330 hoses are used for ship to shore and ship to ship, dockside, and general shipboard use. All hoses are 100% aromatic resistant, anti static and can be used for suction and discharge.

*COMPOTEC® hoses are fitted with an extensive range of couplings readily available externally swaged with Stainless Steel ferrules.

*All the "COMPOTEC® MARINE" hoses complies with B.S. 5842:1980, IMO CODE PAR 2.12 & 5.7

Safety

*All hoses are tested at 11/2 times rated working pressure for safety and reliability, in accordance with BS 5842;1980 clause 6.4.Full test certification can be supplied on request, issued in our laboratories, or witnessed form independent third part Institutes.

*Hoses are designed, for type approval, to a burst pressure 5 time the W.P.
Burst pressure indicated, is at ambient temperature when tested in accordance with BS 5173 section 102.10.1990.

*Electrical continuity is achieved by the two wires bonded to the end fittings, this helps dissipate accumulated charge and to avoid static flash. The electric resistance of hose assemblies is less than 10 ohms, as required by BS 5842:1980 clause 6.2. Hose assemblies can also be provided, on request, electrically discontinuous.

*It is possible, on request, to offer a range of hoses with fire and flame resistance CL 1, please contact COMPOTEC® Technical Department for further information.

Temperature range

-40ºC + 100ºC

Size		Maximum W.P		Burst		Bend Radius		Weight		Maximum length
mm	Inch	Bar	psi	mm	psi	mm	Inch	kg/mt.	Lb/Ft	Mt	Feet
25	1	15	200	80	1160	90	31/2	1.1	0.7	25	82
40	11/2	15	200	80	1160	120	41/2	1.5	1.0	25	82
50	2	15	200	80	1160	150	6	2.1	1.4	25	82
63	21/2	15	200	80	1160	180	7	2.8	1.9	25	82
76	3	15	200	80	1160	300	12	3.8	2.6	25	82
100	4	15	200	80	1160	400	16	7.0	4.7	25	82
150	6	15	200	80	1160	550	22	12	8.0	25	82
200	8	15	200	80	1160	675	26	16	10.8	25	82

Note :
All hoses are available in an assortment of colors and, it is possible, on request, to add a "customer labeling" or "product labeling " to the outside wall. Burst pressure indicated is at ambient temperature. Maximum temperature rating can only be maintained when working within limits of working pressure. *COMPOTEC® PTFE MARINE 330, has been approved with "Type approval Certificate" from: DNV- Det Norske Veritas - Cer. Nº P-10629 R I N A- Italian Register of Navy -Cert, Nº MAC/81398/1/TO/99

Vikram & Co. specialized in all types of hoses such as polypropylene, hydraulic, rubber hose, stainless steel hose, couplings, bellows, expansion joint, and pipe fittings in Mumbai India.

Profile | Products | Enquiry | Contact Us | Site Map